Products

£8.95

Infra-Red Lamp/Bulb Holder for Route Stand/Hot Rack

Part of our vast range of Spares/Replacements available on our website. These Infra-Red Lamp/Bulb Holders...

Part of our vast range of Spares/Replacements available on our website. These Infra-Red Lamp/Bulb Holders are used to connect and hold the Infra-Red Heat Bulbs in place on our Route Stand/Hot Rack. These should be fitted with our Infra-Red Reflectors, which are used to shield the heat from the bulbs to prevent damage to the Route Stand and wires. See the quantity discounts section for huge savings! These are the only Lamp Holders that are compatible with our Route Stands. Using any other holders may cause permanent damage to your Route Stand. Non-jacketed Lamp Holder, complete with fly heads and pre-cut additional cable...

£7.10

Infra-Red Reflector for Route Stand/Hot Rack

Part of our vast range of Spares/Replacements available on our website. These Infra-Red Reflectors are used on...

Part of our vast range of Spares/Replacements available on our website. These Infra-Red Reflectors are used on our Route Stand/Hot Rack to sit the Infra-Red Lamp Holders in and to shield the heat from the Infra-Red Bulbs to prevent damage to the unit and wires. See the quantity discounts section for huge savings! These are the only Reflectors that are compatible with our Route Stands. Using any other Reflectors may cause permanent damage to your Route Stand. These should be replaced at regular intervals to maximise the efficiency of the Route Stand.

Inkjet Printing Conveyors

Part of our vast range of Conveyors, our Inkjet Printing Conveyors are for printing barcodes,...

Part of our vast range of Conveyors, our Inkjet Printing Conveyors are for printing barcodes, labels or certain patterns on products that are fed through it. These are made to suit the specific requirements of any customer. General specification as follows: - 304 grade stainless steel construction throughout. Conveyor length, width, and height, supplied to suit customer's exact requirements. Hygienic design, to aid cleaning routines. 2-ply PU belting, available in a wide range of widths and materials, complete with central tracking guide. Quick-release belt tension fitted to tail roller, as standard, to aid cleaning under belt. Low friction, round bar support bed, to prevent belt sticking....

Inspection Table

Part of our range of Stainless Steel Tables. Our Inspection Table is fitted...

Part of our range of Stainless Steel Tables. Our Inspection Table is fitted with added features to aid the inspection of any product. Bespoke designs to meet the customers exact needs. General specification as follows: - Manufactured from 304 grade stainless steel. Fitted with lighting above and/or below to suit inspection requirements. Stainless steel or translucent table top. Magnetic bar on exit if required. All inspection tabling is manufactured to customer requirements. Please call or email to speak to our team regarding prices and further information.

Insulated Tables

Part of our range of Stainless Steel Tables available on our website. Our Insulated Tables are...

Part of our range of Stainless Steel Tables available on our website. Our Insulated Tables are designed to maintain the temperature of the product held in them - such as keeping ice cubes cold or keeping liquid heated for longer. Specification Manufactured from 304 or 316 grade stainless steel. High quality design for aesthetics and durability. Hygienically made and easy to clean down. Double-skinned top, filled with rockwool insulation. All tables designed to suit customer requirements. Manufactured to any custom dimensions. Can be fitted with undershelf, or support bars. Fitted with ball valve outlet for drainage. Non-slip or bolt-down feet available. Can also be...

£18.00

Knee-Lever Hose

Icon Knee-Lever Hose, sold as a spare/replacement for our Knee-Lever Sinks. Used to...

Icon Knee-Lever Hose, sold as a spare/replacement for our Knee-Lever Sinks. Used to connect the Knee-Lever Valve to the Knee-Lever Spout. Easy-fitting, simply disconnect the old hose and attach the new one. Manufactured from quality 304 grade stainless steel for excellent durability. Part of our range of Sink Taps & Valves available on our website. Other Sinks Available on our Website Hand-Washing Sinks Catering Sinks Knee-Operated Sinks Infrared Sensor Tap Sinks Utility Sinks Mop Sinks Sink Taps & Valves

£42.00

Knee-Lever Spout

Part of our vast range of Taps & Valves available on our website....

Part of our vast range of Taps & Valves available on our website. The Icon Knee-Lever Spout is sold as a spare/replacement for our Knee-Operated Sinks. Manufactured from quality 304 grade stainless steel for excellent durability. Easy-fitting, simply disconnect the old spout and attach the new one to the rear of the sink and screw into the Knee-Lever Hose. Other Sinks Available on our Website Hand-Washing Sinks Catering Sinks Knee-Operated Sinks Infrared Sensor Tap Sinks Utility Sinks Mop Sinks Sink Taps & Valves

£72.50

Knee-Lever Valve

Part of our vast range of Taps & Valves available on our website. The Icon...

Part of our vast range of Taps & Valves available on our website. The Icon Knee-Lever Valve is sold as a spare/replacement for our Knee-Lever Sinks. Manufactured from high-quality 304 grade stainless steel. Excellent durability and rust resistance. Easy-fitting, simply disconnect the old valve, attach the new valve to the bracket on the sink and connect to the Knee-Lever Hose. The small push buttons are not sold separately, a full replacement valve must be purchased. Part of our range of Sink Taps & Valves available on our website. Other Sinks Available on our Website Hand-Washing Sinks Catering Sinks Knee-Operated Sinks Infrared Sensor Tap Sinks Utility Sinks...

Knife and Utensil Sterilising

Designed to safely hold knives when not in use while being sanitised. Various...

Designed to safely hold knives when not in use while being sanitised. Various different designs and products available to suit requirements. General specification as follows: - Manufactured from high quality 304 grade stainless steel. All sanitisers available are made to suit customer requirements, the pictured products are examples of ones previously manufactured. Singular or multi-knife sterilisers available. Please call or email to speak to our team regarding prices and further information.

Knife Holder

Icon Engineering Knife Holders are the perfect solution to Knife Storage for a...

Icon Engineering Knife Holders are the perfect solution to Knife Storage for a certain machine or part of a factory. Designed to safely hold knives when not in use and can be wall or machine mounted with pre-cut mounting holes. General specification as follows: - Manufactured from 304 grade stainless steel and polyethylene. Hygienically designed to be easily rinsed/washed. Al our Knife Holders are designed and manufactured to suit the exact customer requirements. Singular or multi-knife holders available. We also manufacture Knife Sterilisers to store and clean knives while not in use. Please call or email to speak to...

Large Bowl Utility Sink

Part of our vast range of Sinks available on our website. Our Large Bowl...

Part of our vast range of Sinks available on our website. Our Large Bowl Utility/Belfast Sink is a fully welded hygienic sink, ideal for washing large items such as trays. Specifications Manufactured from 304 grade stainless steel. Heavy duty 40x40x2mm box section frame for a strong design. Please select taps from drop-down list, if required. You can also add a shut off ball valve, if required. Supplied with a 1.5" BSP waste nipple, as standard. Can be fitted with adjustable feet or castors. Dimensions Manufactured to the specification required by customer. Please contact us via email or call for any bespoke...

£98.00

Letter Flap

Icon Engineering standard stainless steel letter flap. Designed to be fitted to the...

Icon Engineering standard stainless steel letter flap. Designed to be fitted to the doors of commercial or domestic buildings for received post through. General specifications as follows: - Manufactured from premium quality 304 grade stainless steel. Dimensions - 310 x 105mm (Width x Height). Letter opening dimensions - 254 x 47mm (Width x Height). Fixing screws included. Open slot Letter Sleeves are also available on our website. Bespoke sized letter flaps can also be purchased from us, please contact our team via email or phone call to discuss further information and prices.

View All Products

Newest Products