Part of our range of Catering Tables available on our website. Our Stainless Steel Catering Tables are perfect for use in hygienic areas such as kitchens, canteens and dining areas. General specification as follows: - Manufactured from 304 grade brushed stainless steel. 1.2mm Table top folded down. 30 x 30 x 1.5mm Box section frame for a strong, durable design. Under-shelf - 250mm from floor, to allow for easy cleaning. All legs are fitted with height-adjustable feet. Standard height - 900mm. Standard depth - 600mm. Optional length - select your required length from the drop down menu. Catering Tables can also be fitted...

Part of our range of Catering Tables available on our website. Our Stainless Steel Catering Tables are perfect for use in hygienic areas such as kitchens, canteens and dining areas. General specification as follows: - Manufactured from 304 grade brushed stainless steel. 1.2mm Table top folded down. 30 x 30 x 1.5mm Box section frame for a strong, durable design. Under shelf - 250mm from floor, to allow for easy cleaning. All legs are fitted with height-adjustable feet. 50mm High rear upstand. Upstand rear cover available from drop down options. Standard height - 900mm. Standard depth - 600mm. Optional length - select your required...

Part of our vast range of Spares/Replacements available on our website. These Infra-Red Heat Bulbs are used on our Route Stand/Hot Rack, held in place by our Infra-Red Lamp Holders in and shielded by our Infra-Red Reflectors to prevent damage to the unit and wires. See the quantity discounts section for huge savings! These are non-jacketed, push in and 300w low pressure. The lamp is supplied in a protective sleeve, and should not be touched by hand. These are the only Heat Bulbs that are compatible with our Route Stands. Using any other Heat Bulbs may cause permanent damage to your Route Stand. These should be replaced at regular intervals to...

Part of our vast range of Spares/Replacements available on our website. These Infra-Red Lamp/Bulb Holders are used to connect and hold the Infra-Red Heat Bulbs in place on our Route Stand/Hot Rack. These should be fitted with our Infra-Red Reflectors, which are used to shield the heat from the bulbs to prevent damage to the Route Stand and wires. See the quantity discounts section for huge savings! These are the only Lamp Holders that are compatible with our Route Stands. Using any other holders may cause permanent damage to your Route Stand. Non-jacketed Lamp Holder, complete with fly heads and pre-cut additional cable...

Icon Engineering Knee-Lever Valve, sold as a spare/replacement for our Knee-Lever Sinks. Manufactured from high-quality 304 grade stainless steel Excellent durability and rust resistance. Easy-fitting, simply disconnect the old valve, attach the new valve to the bracket on the sink and connect to the Knee-Lever Hose. The small push buttons are not sold separately, a full replacement valve must be purchased. Part of our range of Sink Taps & Valves available on our website.

STOCK SALE: USE DISCOUNT CODE ICON100 AT CHECKOUT FOR £100 OFF EACH SINK! Part of our vast range of Sinks available on our website, the Single-Station (Flat Fronted) Knee-Operated Sink is perfect for any hand-washing area. Specification 304 grade stainless steel construction throughout. Fully welded design & grain polished for an aesthetic finish. Fitted with Knee-Lever Valve, Hose & Spout as standard. Fixing holes in the rear of frame for mounting to the wall. Fitted with 1½" BSP waste outlet in bottom of trough. Drop-Down Box Options Thermostatic Mixer Valve to combine hot & cold water feeds. Soap Dispenser to fit to the rear of sink....

Part of our vast range of Sinks available on our website, the Single-Station (Slimline) Knee-Operated Sink is perfect for any hand-washing area. Specification  304 grade stainless steel construction throughout. Fully welded design & grain polished for an aesthetic finish. Fitted with Knee-Lever Valve, Hose & Spout as standard. Fixing holes in the rear of frame for mounting to the wall. Fitted with 1½" BSP waste outlet in bottom of trough. Drop-Down Box Options Thermostatic Mixer Valve to combine hot & cold water feeds. Soap Dispenser to fit to the rear of sink. Pedestal to make sink free-standing instead of wall-mounted. Dimensions Overall Unit: 300 x 375 x 642mm (length x...

Part of our vast range of stainless steel Hand-Washing Sinks available on our website. This Handwash Basin comes complete with taps & waste, and is our most basic sink available on our website. Specification Wall-mounted for ease of installation. Supplied with a pair of Basin Mounted Taps (Hot & Cold). A support leg is included to provided additional strength, replacements for this can be purchased online here. Dimensions Overall - 400mm wide x 342mm deep x 230mm high. Bowl - 335mm wide x 225mm deep x 120mm high.

Icon Engineering Drainage Shelves are designed for use in commercial kitchens, and are mounted on the wall using the brackets included to provide a strong, durable and hygienic solution to drainage.     Manufactured from 304 grade stainless steel. Drainage Shelf Brackets and Mesh Top included. Dimensions Length required can be chosen from the drop-down menu. Standard depth = 300mm. Please contact our team for any queries or sizes not listed.

Icon Drop Boxes are designed for use in commercial restaurants/takeaways and in industrial environments to keep important belongings in individual lockers. With a slot either side, it gives the capability of dropping small items into the locked box without the need to unlock it. General specification as follows: -        Manufactured from 304 grade stainless steel. Well designed, quality product. Designed for durability and an aesthetic look. 6 box capacity - 2 high x 3 wide. Standard size: 235 mm (h) x 360mm (w) x 165mm (d). Removable boxes laser etched numbered 1 - 6 front and rear....

Part of our range of Catering Spares, our Double Deck Mounted Pre-Rinse Unit is designed to be fitted on all of our Catering Sinks. This can be sold as an add-on part, or as a spare/replacement. General specification as listed below: - 8" Spout & valve can be included from the drop-down menu. (We also offer 6", 10" & 12" versions of this spout). Deck-mounted tap base with hot & cold levers. (We also offer a wall-mounted version of this unit). Rear wall bracket for stability & spring to keep hose rigid. Flexible hose & spray gun for ease of use....

To be used as an alternative to our standard Knee-Operated Valves on our Catering Sinks. Infra-red sensor to activate flow. Fast and responsive flow. Battery operated using 4 x Standard AA Batteries for a long life.