15mm Thermostatic Mixer Valve, designed to mix hot and cold water feeds to a set temperature. See our quantity discounts below for huge savings! To be installed to our Knee-Operated Hand Wash Sinks. Please note: It is advised that Hand Wash Sinks with more than three stations require two mixer valves.

Icon Knee-Lever Hose, sold as a spare/replacement for our Knee-Lever Sinks. Used to connect the Knee-Lever Valve to the Knee-Lever Spout. Easy-fitting, simply disconnect the old hose and attach the new one. Manufactured from quality 304 grade stainless steel for excellent durability. Part of our range of Sink Taps & Valves available on our website. Other Sinks Available on our Website Hand-Washing Sinks Catering Sinks Knee-Operated Sinks Infrared Sensor Tap Sinks Utility Sinks Mop Sinks Sink Taps & Valves

This Fibreglass Sleeving is to be used on our Route Stand to provide extra insulation and protection for the cables, whilst keeping them flexible. This is the only approved sleeving to use on our Route Stand. Located in the canopy of the Route Stand. Sold as a 5mtr length to suit a complete Route Stand. Not using this sleeving could cause permanent damage to the route stand.

Heatproof Cable available as spare or replacement for Icon Engineering Twin Route Stands / Hot Racks. Purchase price is for 8 linear metres. Located in the canopy of the Route Stand. 8mtr required for complete rebuild of 2-Tier Route Stand. Sold as an 8mtr length. You can also purchase a 13mtr length of cable for our 3-Tier Route Stand / Hot Racks. Not using this cabling could cause permanent damage to the route stand.

Part of our range of Catering Spares. Our Route Stand Grids are designed to be place on each level of our Route Stand/Hot Rack for pizza boxes to sit on. These grids will reduce the amount of sweat when the boxes are under the heat lamps as they allow air flow around the bottom of the box. Manufactured from 304 grade brushed stainless steel. Easy installation onto the Route Stand, no tools required. Two standard length options available to suit our 1350/1600mm Route Stands. Can be fitted to each level of the Route Stand. These are also known as Hot Rack...

Icon Sink Mixer Taps, complete with Swing Spout. Designed to fit all standard Icon catering sinks. These can be purchased as spares or replacements. These are also available on our website with a high neck spout. Manufactured from high quality 304 grade stainless steel. Fitted with separate hot and cold levers. Choose from an 8" or 12" version from the drop down menu. (We also offer 6" or 10" versions of this spout). Hygienic, easy clean design - perfect for commercial/industrial use. Quick and easy to install. Tap centres adjustable 175-200mm.

Part of range of Catering Spares, our Tab Grabber is designed to be fitted to our Route Stands to hold order tickets on to help keep track of orders during busy periods. Aluminium track ticket holder. Pre-drilled - ready for installation. Length - 1220mm. Also know as a slide rail.

Part of our vast range of spares/replacements available on our website. This is a replacement leg for our Handwash Basin, which can be purchased instead of having to purchase a whole new sink, etc. Specification Manufactured from 304 grade stainless steel. Heavy duty design for increased strength. Bolted to the sink and floor to prevent any movement. Dimensions To suit New Style Sink - Box Section Length = 750mm To suit Old Style Sink - Box Section Length = 815mm Other Sinks Available on our Website Hand-Washing Sinks Catering Sinks Knee-Operated Sinks Infrared Sensor Tap Sinks Utility Sinks Mop Sinks...

Part of our range of Sink Taps/Valves available on our website. Icon Sink Mixer Taps, complete with High Neck Spout are designed to fit all standard Icon catering sinks. These can be purchased as spares or replacements. These are also available on our website with a swing nozzle spout. Manufactured from high quality 304 grade stainless steel. Fitted with separate hot and cold levers. Long high neck 8" gooseneck spout included. Hygienic, easy clean design - perfect for commercial/industrial use. Quick and easy to install. Tap centres adjustable 175-200mm. Other Sinks Available on our Website Hand-Washing Sinks Catering Sinks Knee-Operated Sinks Infrared...

Part of our vast range of Taps & Valves available on our website. Our Mop Sink Lever Taps are designed to fit all standard Icon Mop Sinks. General specification as per the listed criteria: - 304 Grade stainless steel construction throughout. Hygienic design to suit the environment they are used in. Easy fitment - simply unscrew the old pair and refit the new. Lever operated for ease of use. Supplied as a pair (hot and cold). Other Sinks Available on our Website Hand-Washing Sinks Catering Sinks Knee-Operated Sinks Infrared Sensor Tap Sinks Utility Sinks Mop Sinks Sink Taps & Valves

Part of our vast range of taps & valves available on our website. The Icon Basin Mounted Taps can be fitted to most of our standard catering sinks and can be purchased as replacements or spares. Hygienic design for ease of cleaning & maintenance. Quick and easy fitment, no plumber required. Lever operated for a large range of flow control. Supplied as a pair (hot and cold). All Sinks Available on our Website Hand-Washing Sinks Catering Sinks Knee-Operated Sinks Infrared Sensor Tap Sinks Utility Sinks Mop Sinks Sink Taps & Valves

To be used as an alternative to our standard Knee-Operated Valves on our Catering Sinks. Infra-red sensor to activate flow. Fast and responsive flow. Battery operated using 4 x Standard AA Batteries for a long life.