Products
£282.00
Part of our vast range of stainless steel Hand-Washing Sinks available on our...
Part of our vast range of stainless steel Hand-Washing Sinks available on our website. This Handwash Basin comes complete with taps & waste, and is our most basic sink available on our website.
Specification
Wall-mounted for ease of installation.
Supplied with a pair of Basin Mounted Taps (Hot & Cold).
A support leg is included to provided additional strength, replacements for this can be purchased online here.
Dimensions
Overall - 400mm wide x 342mm deep x 230mm high.
Bowl - 335mm wide x 225mm deep x 120mm high.
From
£62.00
Part of our vast range of spares/replacements available on our website. This is...
Part of our vast range of spares/replacements available on our website. This is a replacement leg for our Hand Wash Basin, which can be purchased instead of having to purchase a whole new sink, etc.
Specification
Manufactured from 304 grade stainless steel.
Heavy duty design for increased strength.
Bolted to the sink and floor to prevent any movement.
Dimensions
To suit New Style Sink - Box Section Length = 750mm
To suit Old Style Sink - Box Section Length = 815mm
£61.20
Heatproof Cable available as spare or replacement for Icon Engineering Twin Route Stands...
Heatproof Cable available as spare or replacement for Icon Engineering Twin Route Stands / Hot Racks.
Purchase price is for 8 linear metres.
Located in the canopy of the Route Stand.
8mtr required for complete rebuild of 2-Tier Route Stand.
Sold as an 8mtr length.
You can also purchase a 13mtr length of cable for our 3-Tier Route Stand / Hot Racks.
Not using this cabling could cause permanent damage to the route stand.
£99.45
Heatproof Cable available as spare or replacement for Icon Engineering Triple Route Stands /...
Heatproof Cable available as spare or replacement for Icon Engineering Triple Route Stands / Hot Racks.
Purchase price is for 13 linear metres.
Located in the canopy of the Route Stand.
8mtr required for complete rebuild of 3-Tier Route Stand.
Sold as an 13mtr length.
You can also purchase a 8mtr length of cable for our 2-Tier Route Stand / Hot Racks.
Not using this cabling could cause permanent damage to the route stand.
£140.00
Part of our range of Sink Taps/Valves available on our website. Icon Sink...
Part of our range of Sink Taps/Valves available on our website. Icon Sink Mixer Taps, complete with High Neck Spout are designed to fit all standard Icon catering sinks. These can be purchased as spares or replacements. These are also available on our website with a swing nozzle spout.
Manufactured from high quality 304 grade stainless steel.
Fitted with separate hot and cold levers.
Long high neck 8" gooseneck spout included.
Hygienic, easy clean design - perfect for commercial/industrial use.
Quick and easy to install.
Tap centres adjustable 175-200mm.
£8.95
Part of our vast range of Spares/Replacements available on our website. These Infra-Red Heat Bulbs are used...
Part of our vast range of Spares/Replacements available on our website. These Infra-Red Heat Bulbs are used on our Route Stand/Hot Rack, held in place by our Infra-Red Lamp Holders in and shielded by our Infra-Red Reflectors to prevent damage to the unit and wires. See the quantity discounts section for huge savings! These are non-jacketed, push in and 300w low pressure. The lamp is supplied in a protective sleeve, and should not be touched by hand. These are the only Heat Bulbs that are compatible with our Route Stands. Using any other Heat Bulbs may cause permanent damage to your Route Stand. These should be replaced at regular intervals to...
£8.95
Part of our vast range of Spares/Replacements available on our website. These Infra-Red Lamp/Bulb Holders...
Part of our vast range of Spares/Replacements available on our website. These Infra-Red Lamp/Bulb Holders are used to connect and hold the Infra-Red Heat Bulbs in place on our Route Stand/Hot Rack. These should be fitted with our Infra-Red Reflectors, which are used to shield the heat from the bulbs to prevent damage to the Route Stand and wires. See the quantity discounts section for huge savings! These are the only Lamp Holders that are compatible with our Route Stands. Using any other holders may cause permanent damage to your Route Stand. Non-jacketed Lamp Holder, complete with fly heads and pre-cut additional cable...
£7.10
Part of our vast range of Spares/Replacements available on our website. These Infra-Red Reflectors are used on...
Part of our vast range of Spares/Replacements available on our website. These Infra-Red Reflectors are used on our Route Stand/Hot Rack to sit the Infra-Red Lamp Holders in and to shield the heat from the Infra-Red Bulbs to prevent damage to the unit and wires.
See the quantity discounts section for huge savings!
These are the only Reflectors that are compatible with our Route Stands.
Using any other Reflectors may cause permanent damage to your Route Stand.
These should be replaced at regular intervals to maximise the efficiency of the Route Stand.
£18.00
Icon Knee-Lever Hose, sold as a spare/replacement for our Knee-Lever Sinks. Used to...
Icon Knee-Lever Hose, sold as a spare/replacement for our Knee-Lever Sinks. Used to connect the Knee-Lever Valve to the Knee-Lever Spout.
Easy-fitting, simply disconnect the old hose and attach the new one.
Manufactured from quality 304 grade stainless steel for excellent durability.
Part of our range of Sink Taps & Valves available on our website.
£42.00
Icon Knee-Lever Spout, sold as a spare/replacement for our Knee-Lever Sinks. Easy-fitting, simply disconnect...
Icon Knee-Lever Spout, sold as a spare/replacement for our Knee-Lever Sinks.
Easy-fitting, simply disconnect the old spout and attach the new one to the rear of the sink and screw into the Knee-Lever Hose.
Manufactured from quality 304 grade stainless steel for excellent durability.
Part of our range of Sink Taps & Valves available on our website.
£72.50
Icon Engineering Knee-Lever Valve, sold as a spare/replacement for our Knee-Lever Sinks. Manufactured from...
Icon Engineering Knee-Lever Valve, sold as a spare/replacement for our Knee-Lever Sinks.
Manufactured from high-quality 304 grade stainless steel
Excellent durability and rust resistance.
Easy-fitting, simply disconnect the old valve, attach the new valve to the bracket on the sink and connect to the Knee-Lever Hose.
The small push buttons are not sold separately, a full replacement valve must be purchased.
Part of our range of Sink Taps & Valves available on our website.
Designed to safely hold knives when not in use while being sanitised. Various...
Designed to safely hold knives when not in use while being sanitised. Various different designs and products available to suit requirements. General specification as follows: -
Manufactured from high quality 304 grade stainless steel.
All sanitisers available are made to suit customer requirements, the pictured products are examples of ones previously manufactured.
Singular or multi-knife sterilisers available.
Please call or email to speak to our team regarding prices and further information.
